LitDev Extension API

Geography	LD3DView	LDArray	LDBits	LDBlueTooth
LDCall	LDChart	LDClient	LDClipboard	LDColours
LDCommPort	LDController	LDControls	LDCursors	LDDataBase
LDDateTime	LDDebug	LDDialogs	LDDictionary	LDEffect
LDEmail	LDEncryption	LDEvents	LDFastArray	LDFastShapes
LDFigures	LDFile	LDFocus	LDftp	LDGeography
LDGraph	LDGraphicsWindow	LDHashTable	LDHID	LDIcon
LDImage	LDInline	LDIOWarrior	LDList	LDLogic
LDMath	LDMathX	LDMatrix	LDMusic	LDNetwork
LDPhysics	LDProcess	LDQueue	LDRegex	LDResources
LDScrollBars	LDSearch	LDServer	LDSettings	LDShapes
LDShell	LDSort	LDSound	LDSpeech	LDStatistics
LDStopwatch	LDText	LDTextWindow	LDTimer	LDTranslate
LDUnits	LDUtilities	LDVector	LDWaveForm	LDWebCam
LDWindows	LDxml	LDZip

LDIOWarrior
Access IO-Warrior devices.
See http://www.codemercs.com/io-warrior/?L=1

Detatch	GetName	GetPID
GetReportSize	GetSerialNumber	GetSpecialReportSize
GetVersion	GetVID	Initialise
LastError	LCDWrite	Read
Timeout	Write

Detatch()
Disconnect all IO-Warrior devices.

GetName(id)
Get the device name.
id The device number (indexed from 1).
returns The device name or "".

GetPID(id)
Get the device PID.
id The device number (indexed from 1).
returns The device PID (hex) or 0.

GetReportSize(id)
Get the report size.
Number of bytes in a Read/Write.
This the report size for channel 0.
id The device number (indexed from 1).
returns The report size or 0.

GetSerialNumber(id)
Get the device serial number.
id The device number (indexed from 1).
returns The device serial number or "".

GetSpecialReportSize(id)
Get the special report size.
Number of bytes in a special Read/Write.
This the report size for channel 1.
id The device number (indexed from 1).
returns The special report size or 0.

GetVersion(id)
Get the device firmware version.
id The device number (indexed from 1).
returns The device firmware version or 0.

GetVID()
Get the device VID (Common to all IOWarrior types).
returns The device VID (hex) or 0.

Initialise()
Initialise IO-Warrior devices.
returns The number of devices.

LastError()
Get the last system error message.
"" for no error (probably only useful for detailed error analysis of underlying system calls).
returns Last error number.

LCDWrite(id,text)
Write text to the LCD (untested).
id The device number (indexed from 1).
text The text to write.

Read(id,channel,blocking,count)
Read from the IO-Warrior device.
id The device number (indexed from 1).
channel The channel to read (indexed from 0).
blocking "True" (return after the state changes) or "False" (return with current state).
count The number of bytes to read (if zero, then the ReportSize is used if channel is 0 or SpecialReportSize if channel is 1).
See GetReportSize and GetSpecialReportSize.
returns An array of read bytes [0 to 255].

Timeout
The timeout for read and writes in ms.
Default 1000.

Write(id,channel,data)
Write to the IO-Warrior device.
id The device number (indexed from 1).
channel The channel to write to (indexed from 0).
data An array of bytes to send [0 to 255].
The array size should be ReportSize for channel 0 and SpecialReportSize for channel 1.
See GetReportSize and GetSpecialReportSize.
returns The number of bytes successfully written.